Skip to Content

Terms & Conditions

General Terms and Conditions


1. By signing the purchase agreement with the Buyer, the purchase agreement comes into effect and obligates the seller to fulfill it. Fulfillment of the contract is expected even in the case of a verbal agreement. Payment of a deposit does not affect the conclusion of the purchase agreement that has come into effect. The subject of the expected job are products delivered by UNIS, made according to factory standards. Deficiencies that may arise due to improper handling, unprofessional assembly, or subsequent modifications are not recognized.

2. The Buyer is obliged to inspect the goods without delay upon receipt and to determine any incompleteness or deficiency. If a deficiency is determined later, the buyer must notify in writing without delay within 3 calendar days, and in any case before the installation or assembly of the delivered goods. Otherwise, the seller is no longer responsible for visible defects. Replacement of product elements due to damage will only be guaranteed if recorded at the time of delivery in the delivery note or shipping document, and in any case before the installation or assembly of the delivered goods. Later complaints about damage to product elements will not be accepted.

3. If defects in the quality of the goods that have already been delivered are subsequently proven, with a timely complaint, at its discretion UNIS will: 

  • Collect the goods on-site or at another location depending on the agreed delivery parity
  • Replace free of charge (replaced parts become the property of UNIS) 
  • Repair according to warranty conditions
  • Act in accordance with positive legal regulations according to the Consumer Protection Act.

4. Repairs on products made by the customer or a third unauthorized party, without the consent of UNIS, will not burden UNIS and are not subject to warranty rights for the delivered products from the UNIS program.

5. UNIS will not refund the customer any amounts as damage costs. The exception applies only to damages caused by intentional negligence or gross negligence intentionally caused by UNIS.

6. Claims for damages arising from business disruption due to delayed delivery or incorrect delivery are specifically excluded, unless such cases are specifically contractually defined.

7. The stated and guaranteed delivery deadlines begin to run from the date of delivery in accordance with the rules of the UNIS company.

8. If the customer declares withdrawal from the contract without having the right to do so, UNIS will accept the customer's declaration of withdrawal and will charge a cancellation fee of 20% of the gross purchase price for that case.

9. The customer generally takes over the purchased products from the seller and transports them at their own expense and risk, unless otherwise agreed in writing. The prices for picking up the goods do not include delivery, assembly, or installation costs. They may be subject to another sales contract.

10. The customer is solely responsible for the accuracy of the provided measurements, as well as for the correctness of the solutions proposed with any plans and drawings.

11. All assembly or installation work must be carried out exclusively by authorized and qualified persons. Authorization for the installation or assembly of products from the UNIS program is proven by a valid certificate issued by the UNIS company, and any expertise can be proven by reviewing the registration of the activity of the company that performed the installation or assembly work. UNIS's instructions for assembly and installation must be respected and consistently applied in every case.

12. Installation defects and all resulting errors made by the company or person who performed the installation or assembly are not covered by UNIS's warranty, and for such cases, UNIS does not accept any claims for damages.

13. The warranty and guarantee are valid only if technical regulations are followed. The warranty is void in its entirety in the case of unusual installation of the product or inappropriate use of the product.

14. UNIS does not assume any warranty for goods from special promotional sales, which is explicitly indicated in sales or promotional materials.

15. Any claims under the warranty do not release the buyer from the obligation to pay for the goods. Warranty work will only be carried out after the full amount has been paid.

16. For products that have been damaged due to improper installation or for which any modifications or additions have been made that do not comply with factory standards, the right to warranty is lost and can no longer be honored. With each delivery of products, UNIS provides instructions for installation, assembly, and handling, which must be adhered to in all respects. Damages or work resulting from improper installation as well as non-compliance with the instructions for installation, assembly, or handling are excluded from the warranty and will be visible on the invoice as service work.

17. When performing service work, the buyer must ensure that the service technician has unobstructed access to the item being serviced. All elements that obstruct the technician's access (such as furniture parts, etc.) must be removed by the buyer. It is also necessary to ensure complete covering and protection of contact surfaces such as floors, walls, etc. If this is not done, UNIS cannot assume responsibility for any damage that may occur.

18. UNIS provides a 24-month warranty on the functionality of its products, provided that they are maintained according to UNIS's guidelines for care, handling, servicing, and installation. The warranty applies exclusively to the specific individual element. If two or more elements are in an uninterrupted connection, special consent from UNIS is required to realize the warranty for such an assembly. If the connection of individual elements is not made in an exemplary and professional manner in accordance with technical standards and regulations, UNIS cannot accept the realization of rights under warranty conditions.

19. The buyer has the option, within one week after taking possession of the goods, to return or dispose of packaging waste free of charge in accordance with the Regulation on Packaging Material and Packaging Waste. If the buyer does not use the return option, it is considered agreed that they will use the packaging at their own expense and risk in accordance with the mentioned Regulation.

20. The competent court in Croatia is agreed as the place of jurisdiction, or the court in whose area the sales contract was concluded is competent.

If you have questions regarding these business conditions or would like to receive additional information, please send an email to: info@unis.hr.

Special Provisions of the General Terms and Conditions for UNIS Smart Lock


Article 1 – Subject Matter and Product Characteristics

1. The smart lock marketed by UNIS (hereinafter referred to as the “Seller”) under its own name and brand is an electronic product incorporating digital, communication and biometric functionalities, designed for controlling and managing access to premises and facilities.

2. The Seller acts as the manufacturer of the product within the meaning of applicable legislation, regardless of the fact that the physical manufacturing and development of certain technical components or software may be carried out by external contractual partners and OEM manufacturers.

3. Depending on the model and its technical specifications, the smart lock enables the following methods of authentication and unlocking:

  • Palm Vein Recognition;
  • Three-Dimensional Facial Recognition (3D Face Recognition);
  • Passcode - Personal Identification Number (PIN);
  • NFC card.

4. The Smart Life mobile application, connected to the Tuya platform, is used for configuring, registering users and managing certain functionalities of the product.

5. The smart lock may be operated locally via a Bluetooth connection and, when used together with a compatible Wi-Fi hub, remotely via an internet connection, within the scope of functionalities supported by the specific model.

6. The Wi-Fi hub may be included in certain product packages or offered as a separate additional device. The contents of each package shall be specified in the product description, offer or other relevant sales documentation.

7. The scope of functionalities, technical requirements, connection methods and conditions for using the product are defined in the technical documentation, product specifications and accompanying user instructions.


Article 2 – Smart Life Application and Third-Party Digital Services

1. In order to use the functionalities of the smart lock that require connection to a mobile application, the user must download and install the Smart Life application and, where required, register a user account with the provider of the application.

2. The Smart Life application is a third-party application connected to the Tuya platform. The Seller is neither the developer nor the operator of the application or its associated digital infrastructure. The application is used as a compatible user interface for managing and configuring the product.

3. The use of the Smart Life application is subject to separate terms of use, privacy policies and other rules established by the application provider and/or the relevant entity within the Tuya platform.

4. The Smart Life application is used for local configuration and management of the smart lock via Bluetooth and, when a compatible Wi-Fi hub is used, for remote management of certain product functionalities.

5. The application is used, among other things, for:

  • registering biometric users;
  • adding, modifying and deleting access PIN codes;
  • managing NFC access permissions, where supported;
  • viewing access logs;
  • configuring other supported device functionalities;
  • checking the availability of and initiating OTA firmware updates.

6. Changes to the terms of use, functionalities, technical specifications or manner of provision of the application and third-party digital infrastructure may affect the availability or manner of use of certain smart lock functionalities.

7. The Seller does not independently operate the Smart Life application and cannot guarantee that its provider or the operator of the associated digital services will permanently maintain the existing scope of all services without changes.

8. Nothing in this Article shall exclude the Seller's liability for the product's conformity with the contract, its declared and legally required functionalities, or any other liability that cannot be excluded under mandatory applicable laws.


Article 3 – Connection Methods and Operation of the Smart Lock

1. The smart lock enables management and configuration through the Smart Life mobile application, either via a local Bluetooth connection or, when a compatible Wi-Fi hub is used, via an internet connection.

2. Local connection via Bluetooth

When the smart lock is not connected to a compatible Wi-Fi hub, communication between the Smart Life mobile application and the smart lock takes place via a Bluetooth wireless connection. 

In such cases, while within Bluetooth range, the user may use the application to:

  • view available access logs and events recorded by the lock;
  • view registered users and their respective access permissions;
  • add, modify or delete individual access PIN codes;
  • manage other available device settings and functionalities.

An active internet connection is not required for these local functionalities. A compatible mobile device and an established Bluetooth connection with the lock are sufficient.

3. Remote connection via Wi-Fi hub

If the smart lock is connected to a compatible Wi-Fi hub and the required internet connection, configuration and associated services are available and activated, the user may manage certain device functionalities through the Smart Life application even when not physically near the device.

Remote management may include:

  • remotely viewing access logs and events recorded by the lock;
  • viewing registered users and their access permissions;
  • deleting individual access PIN codes;
  • other remote management functionalities supported by the specific product model.

4. Remote management via a Wi-Fi hub requires an available internet connection, proper operation of the hub, the Smart Life application and the associated digital infrastructure.

5. The Wi-Fi hub is an additional device that extends the management capabilities of the smart lock and is not necessary for using the basic functionalities of the lock, including biometric authentication, PIN code entry and NFC card access, subject to the technical specifications of the specific model.

6. The availability of individual functionalities may depend on the lock model, compatibility of the Wi-Fi hub, application version and conditions under which the digital services are provided.

7. Local management via Bluetooth and remote management via a Wi-Fi hub differ in terms of technical requirements, communication methods and potential transmission of data through third-party digital infrastructure.


Article 4 – User Account and Access Security

1. Registration and maintenance of a user account in the Smart Life application may be required to use certain functionalities of the smart lock.

2. The user is responsible for properly using the application, protecting access credentials and securing their user account in accordance with the application provider's rules.

3. The user must keep passwords, PIN codes, NFC cards and other security credentials confidential and must not make them available to unauthorised persons.

4. The user is responsible for carefully managing access permissions granted to other users, including the timely granting and revocation of access rights.

5. In the event of loss of a mobile device or NFC card, suspected unauthorised access or compromise of a user account, the user must promptly take appropriate measures to protect the device and access permissions.

6. The user must use the product in accordance with the user instructions, safety recommendations and technical documentation.

7. The user's responsibility for proper use of the product shall not affect the Seller's statutory liability for product defects, product safety or other matters for which the Seller is liable under applicable law.


Article 5 – Biometric Functionalities and Processing of Biometric Data

1. The smart lock is equipped with biometric authentication systems enabling user verification through Palm Vein Recognition and Three-Dimensional Facial Recognition (3D Facial Recognition).

2. The entry and registration of users' biometric data are performed through the Smart Life mobile application, which serves as the user interface for configuring the smart lock for this purpose.

3. The transmission of data required for the registration of biometric characteristics takes place locally via a Bluetooth wireless connection between the mobile device and the smart lock. An active internet connection is not required for this process, and the remote cloud infrastructure of the Tuya platform is not used for the local transmission of biometric data itself.

4. The smart lock processes biometric characteristics and uses digital biometric templates or algorithmic models (biometric templates) for subsequent comparison and user authentication.

5. Biometric templates are stored locally in the memory of the smart lock in encrypted form and not as original facial photographs or original image recordings of the palm, in accordance with the technical design of the product.

6. According to the technical architecture of the product, biometric templates used for authentication are not stored on remote Tuya cloud servers or within the Smart Life application user account.

7. The biometric functionalities of the product are intended to enable secure access and authentication of authorised users. Biometric templates are not used for advertising, user profiling or any other purposes unrelated to the functionality of the device.

8. The Seller does not have access to biometric templates stored in the smart lock and does not collect or use them for its own purposes, unless such processing is expressly provided for by a specific technical functionality and supported by an appropriate legal basis.

9. The deletion or revocation of an individual biometric user is carried out through the designated device and application functionalities, in accordance with the technical user instructions.

10. Biometric data processed for the purpose of uniquely identifying a natural person constitute special categories of personal data within the meaning of Article 9 of the General Data Protection Regulation (GDPR).

11. A user who activates biometric functionalities and enters the biometric data of other persons must ensure that such processing is lawful, including the existence of an appropriate legal basis and compliance with the requirements of Article 9 GDPR, where applicable.

12. Where processing is based on explicit consent, such consent must be freely given, specific, informed and unambiguous, and it must be possible to withdraw it.

13. Persons whose biometric data are entered into the device must be provided with appropriate information concerning the purpose and method of processing, the types of data processed, the method of storage, the retention period and the possibility of deleting such data.

14. Local processing, transmission via Bluetooth and encrypted local storage of biometric templates constitute technical measures designed to protect privacy and data security. Such measures do not exclude the application of personal data protection legislation or the legal obligations of persons determining the purposes and means of processing.

15. The use of biometric functionalities is not the only available method of accessing the smart lock. Depending on the model, users may also access the device through alternative authentication methods using a PIN code or NFC card.


Article 6 – Alternative Authentication and Access Methods

1. In addition to biometric authentication through Palm Vein Recognition and 3D Facial Recognition, the smart lock enables alternative access methods using a personal PIN code and NFC card, subject to the technical specifications of the specific model.

2. The use of a PIN code or NFC card does not require the entry, storage or use of the user's biometric data for authentication purposes.

3. Users may choose the access method that best suits their needs, including the use of alternative authentication methods instead of biometric functionalities.

4. Alternative access methods enable the product to be used even when a user does not wish to activate biometric functionalities or use biometric authentication.

5. PIN codes are stored locally in the memory of the smart lock and are not stored on Tuya cloud servers, according to the technical architecture of the product.

6. Data relating to NFC cards and their access permissions are stored and processed in accordance with the technical architecture of the specific device model.

7. The user is responsible for securely keeping PIN codes and NFC cards and for promptly deactivating or revoking access permissions in the event of a lost card, a change of user or suspected unauthorised use.

8. The availability and configuration methods of individual authentication methods depend on the technical specifications of the product and are described in the accompanying user instructions.


Article 7 – Access Logs and Device Usage Data

1. The smart lock enables the recording of events related to the use of the device, including the date and time of access, the authentication method used and the name or assigned user label, depending on the device configuration and functionalities of the specific model.

2. Access logs are stored exclusively locally in the memory of the smart lock. According to the technical architecture of the product, access logs are not stored as a permanent event record on Tuya cloud servers.

3. When the smart lock is used without a Wi-Fi hub, the user may view available access logs through the Smart Life application after establishing a local Bluetooth connection between the mobile device and the lock.

4. When the smart lock is connected to a compatible Wi-Fi hub, the user may remotely view available access logs through the Smart Life application without being physically near the device.

5. Remote access to access logs requires communication through the relevant internet and digital infrastructure. The fact that access logs are permanently stored locally in the lock does not exclude the possibility of their temporary transmission or technical processing for the purpose of enabling remote access.

6. The scope, method and duration of any potential transmission or processing of data through third-party infrastructure depend on the actual technical architecture of the product and the associated digital services.

7. Access logs may contain the user's name or assigned label, date and time of access, and information regarding the authentication method used. Such data may constitute personal data within the meaning of the GDPR.

8. A user who determines the purposes and means of recording access by other persons is responsible for ensuring an appropriate legal basis, transparency of processing and compliance with other obligations of a data controller under the GDPR.

9. The user must ensure that persons using the device are appropriately informed about the recording of access events, particularly where the device is used in business premises, accommodation facilities or other premises accessed by employees, guests, customers or other persons.

10. Deleting access PIN codes and revoking access permissions does not necessarily result in the automatic deletion of previously recorded events in the access log. The method and scope of deletion of access logs depend on the technical specifications of the specific model and the associated device functionalities.


Article 8 – Personal Data Protection and Privacy

1. The use of the smart lock and associated digital services may involve the processing of personal data, including user account data, connected device data, access permissions, event logs and device usage information.

2. Biometric data used for unique user identification are processed locally within the device, as described in Article 5 of these Terms and Conditions.

3. User account data, connected device data and other application-related information may be processed through the Smart Life application and its associated digital infrastructure, depending on the technical specifications of the product and the functionalities activated.

4. The Seller processes personal data for its own purposes as a data controller where the relevant factual and legal conditions are met, in accordance with its Privacy Policy.

5. The provider of the Smart Life application and associated digital infrastructure may independently process certain personal data in accordance with its own terms of use and privacy policies. Its role in relation to individual processing activities shall be determined based on the actual circumstances and applicable legislation.

6. Local storage of data in the smart lock does not exclude the possibility of their temporary transmission, technical processing or availability through the application, Wi-Fi hub or third-party infrastructure for the purpose of enabling certain product functionalities.

7. The Seller does not provide an absolute guarantee that providers of the application, platform or associated digital infrastructure do not have the technical ability to access certain data transmitted through their systems, except to the extent that such access has been technically excluded and appropriately verified.

8. The scope, purpose and method of any processing of data by providers of the application and digital infrastructure shall be determined according to their actual technical role, contractual arrangements, privacy policies and applicable personal data protection legislation.

9. A user who uses the smart lock in the course of business activities and determines the purposes and means of processing personal data relating to other persons is responsible for fulfilling their own obligations as a data controller under applicable legislation.

10. The user must ensure that persons to whom access to the product is granted are appropriately informed about the use of the device and the potential processing of their personal data.

11. Further information regarding the processing of personal data carried out by the Seller, including categories of data, purposes of processing, legal bases, recipients of data and data subject rights, is set out in the Seller's Privacy Policy.

12. Nothing in this Article shall restrict the rights of data subjects or the legal obligations of the Seller, the application provider or other persons involved in the processing of personal data.


Article 9 – Firmware Updates and Remote Device Maintenance (OTA)

1. The smart lock supports wireless updating of its embedded software (firmware) using OTA technology (Over-the-Air).

2. The firmware of the smart lock is developed and prepared by the OEM manufacturer, which is responsible for its technical distribution and making updates available to users, in accordance with its contractual relationship with the Seller.

3. OTA updates are performed through the user's mobile device, without the need for an additional Wi-Fi hub. The following requirements must be met:

  • the mobile device must be within Bluetooth range of the smart lock;
  • the mobile device must have an active internet connection;
  • the user must access the interface of the specific device within the Smart Life application;
  • the relevant update must be available for the specific device model.

4. A notification regarding the availability of new firmware is displayed to the user after accessing the interface of the specific device within the Smart Life application. Merely opening the application does not automatically initiate a firmware update.

5. Each firmware update is identified by a corresponding update version number and a Virtual Device ID, which are used to identify the device, associate the appropriate firmware version with the device and ensure update compatibility.

6. The user independently decides whether to download and install the offered update. The update is not downloaded or installed without the user's prior affirmative confirmation, in accordance with the described procedure.

7. The user may reject an offered update and continue using the existing firmware version, except where an update is necessary to comply with mandatory legal requirements or where, due to a serious security risk, appropriate measures must be taken to protect users and the device. In such cases, the user shall be provided with appropriate information regarding the necessity and consequences of the update.

8. OTA updates may be used for the following purposes:

  • addressing security vulnerabilities;
  • correcting software errors;
  • improving device stability and reliability;
  • maintaining compatibility with the application and other connected devices;
  • improving existing or introducing new functionalities;
  • maintaining the product's conformity with applicable technical and legal requirements.

9. During the OTA update process, technical data necessary for device identification, verification of the availability of the appropriate firmware version, distribution of the update and confirmation of successful installation may be processed. Such data may include the Virtual Device ID, current and new firmware version numbers and other technical and diagnostic data.

10. The data referred to in the preceding paragraph are processed to the extent necessary for the functioning of the update process. Such processing may take place through the infrastructure of the OEM manufacturer, the application provider or other involved digital service providers, depending on the actual technical architecture of the system.

11. During the installation of an update, the user must follow the displayed instructions and must not interrupt the firmware transfer and installation process while the update is in progress, unless the technical instructions specify otherwise.

12. The Seller shall ensure or arrange for the availability of necessary firmware updates to the extent and for the period required by applicable legislation, regardless of the fact that the technical development and distribution of the firmware are carried out by the OEM manufacturer.

13. The Seller and the OEM manufacturer shall, within the scope of their contractual and legal obligations, implement appropriate technical and organisational measures to ensure the integrity, authenticity and security of firmware distributed and installed through the OTA process.

14. The installation of updates shall not affect the buyer's statutory rights concerning product conformity, safety and remedies for lack of conformity.


Article 10 – Liability and Limitations

1. The Seller shall be liable for the conformity, quality, safety and functionality of the smart lock in accordance with applicable legislation, the agreed product characteristics and its technical documentation.

2. The Seller shall not be liable for interruptions or limitations in third-party services that are exclusively caused by circumstances beyond the Seller's reasonable control, such as:

  • interruptions or difficulties in the operation of internet service providers;
  • interruptions in cloud infrastructure or third-party servers;
  • technical difficulties or changes in the operation of the Smart Life application;
  • incompatibility of the mobile device or operating system that is not caused by a lack of product conformity;
  • unauthorised interventions by the user or third parties in the device or its software.

3. The limitation of liability referred to in the preceding paragraph shall apply only to the extent that the circumstances concerned are outside the Seller's sphere of responsibility and are not the result of an omission by the Seller or any person for whose actions the Seller is legally responsible.

4. Nothing in these Terms and Conditions shall exclude or limit the Seller's statutory liability for lack of conformity of goods, product safety, mandatory updates, wilful misconduct or gross negligence, or any other rights of buyers that cannot be excluded or limited under mandatory applicable legislation.

5. If, due to the unavailability of the application or associated digital services, a product functionality fails to comply with the agreed or legally required characteristics, the buyer's rights shall be exercised in accordance with applicable legislation.

6. The Seller shall not be liable for damage caused exclusively by improper use of the product, failure to comply with the user instructions, unauthorised interventions or improper management of access permissions by the user, to the extent that such damage results from the user's actions and is not caused by a product defect or omission on the part of the Seller.


Article 11 – Special Provisions for Business Customers

1. The provisions of these Terms and Conditions relating to the use of the Smart Life application, technical requirements, user account security and availability of digital services shall also apply to business customers, unless expressly agreed otherwise.

2. Before installing and putting the product into operation, the business customer must assess the compatibility of the product with its own network and IT infrastructure and ensure appropriate conditions for its use.

3. The business customer is responsible for the proper management of user permissions, access credentials and persons authorised to use the product, as well as for fulfilling its personal data protection obligations where it determines the purposes and means of processing in the course of its business activities.

4. A business customer using biometric functionalities to control access to its premises is responsible for establishing and ensuring an appropriate legal basis for processing biometric data, including compliance with the requirements of Article 9 GDPR, where applicable.

5. The business customer must provide persons using the product with appropriate information regarding the processing of personal data and, where applicable, enable an appropriate alternative access method using a PIN code or NFC card.

6. A business customer using access logs to monitor access by employees, guests or other persons must ensure the lawfulness of such processing, provide appropriate information to the persons concerned and apply the principles of purpose limitation and storage limitation.

7. In business relationships, the liability of the contracting parties may be further regulated by a separate agreement, within the limits permitted by applicable legislation.

8. Nothing in these provisions shall exclude mandatory statutory liabilities of the Seller or manufacturer that apply regardless of whether the buyer is a consumer or a business entity.


Article 12 – Termination or Modification of Digital Services

1. In the event of termination, material modification or restriction of the Smart Life application services or associated digital infrastructure, the Seller shall, to the extent that it has been duly informed of such circumstances and they are within its control, take reasonable measures to inform buyers and preserve the functionality of the product.

2. If such changes affect the agreed or legally required functionalities of the product, the Seller shall act in accordance with its statutory obligations and the rights of buyers.

3. The Seller does not guarantee the permanent availability of any particular third-party platform or the unlimited retention of all its functionalities, unless such an obligation has been expressly assumed by contract or arises from mandatory applicable legislation.

4. The termination or restriction of third-party digital services shall not affect the Seller's obligations regarding statutory product conformity and product safety.


Article 13 – Final Provisions

1. These Special Provisions form an integral part of the General Terms and Conditions and apply to the UNIS smart lock and all other products compatible with the aforementioned lock, unless expressly stated otherwise for a particular product.

2. In the event of any inconsistency between these Special Provisions and the technical documentation of a specific model, the technical documentation shall prevail with regard to the description of the product's technical characteristics and functionalities, while legal matters and buyers' rights shall be interpreted in accordance with applicable legislation.

3. All matters not specifically regulated by these provisions shall be governed by the remaining provisions of the General Terms and Conditions and the applicable laws and regulations of the Republic of Croatia and the European Union.